RGBW Multicolor Footwell LED Kit



An LED controller is required for operation.

You can use RGB, but you'll need RGBW to unlock the product's full potential.

Multicolor.

Add RGBW color-changing ability to your vehicle with our Multicolor Footwell LED Strip Kit! This product is not just RGB, it is RGBW! That means there is an extra integrated LED chip that is specifically white in color, right next to the standard red, green, and blue LEDs. By using an RGBW controller, you can activate and control the white chip independently of the colors. This provides a much more uniform, pure, and bright white color than the traditional method of combining all RGB signals. With our multicolor LED strips installed, the possibilities are endless!

Control.

Our Bluetooth Controller will allow you to choose any color under the sun, including True White, directly from your phone! The mobile app includes a wide variety of features including strobe and fade effects, preset colors, Camera Match, Music Sync, and much more. Our controller will also allow you to adjust the brightness of the LED strips. Any time you power up your strips, they will default to the last color that was previously selected. 

Cut to size.

These LED strips are flexible, IP67 weatherproof SMD-type LED strips, with 3 SMDs per 5 cm. They are cuttable every 3 chips, to size to your need, and come with 3M adhesive backing. Due to the weatherproofing, cut portions cannot be reattached without manual soldering, which removes the weatherproofing properties. Weatherproofing can be reapplied through waterproofing products.

Installation.

The 2-piece kit includes everything you need to install LED strips in the front footwell area on both the driver and passenger side of your vehicle. The 4-piece kit includes everything you need to install LED strips in the front and rear footwell areas on both the driver and passenger side of your vehicle. This kit is very universal in nature, and can be tapped into any 12V power source that you would like when installing.

         

         This kit includes

        Features

        Tech specs

        2 Piece Kit:

        • Two (2) 50cm RGBW SMD30 Strips
        • One (1) wiring harness
        • Two (2) quick splices
        • One (1) red LED toggle switch
        • One (1) DC-to-DT adapter
        • Four (4) zip-ties
        • One (1) 3M outdoor adhesive pad

        4 Piece Kit:

        • Four (4) 50cm RGBW SMD30 Strips
        • One (1) wiring harness
        • Two (2) quick splices
        • One (1) red LED toggle switch
        • One (1) DC-to-DT adapter
        • Eight (8) zip-ties
        • Two (2) 3M outdoor adhesive pads
        • Two (2) RGBW M8 extension wires
        An RGBW Controller is required for operation (not included, sold separately).
        • Adds RGBW color-changing ability to your footwell area.
        • Highly flexible, waterproof LED strips.
        • High-density LEDs for brighter output.
        • Barrel-style M8 connectors, for secure connection. 
        • Measured Lumens: 190 Lumens
        • Power (watts): 3.5
        • Operating Voltage: 9-16V
        • Current (amps @ 13.2V): 0.285
        • Operating Temperature: -40C to 85C (-40F to 185F)
        • Connector(s): M8 Input
        • Intrusion Ratings: IP67 Weatherproof


              Related Items