Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the Profile Prism halos and their drivers have been tuned to produce an amazingly clear, neutral white.
We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED halos and is responsible for their neutral "white when off" look and their amazing, uniform intensity - which is unlike anything else on the market.
There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest halos on the market to install. Now you can forget about failing glue or wires wrapped around the face of your halos. Don't be "that guy" with dripping glue or picture hanging wire visible inside your headlights.
The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs, they are considerably more reliable between hot/cold cycles compared to "new" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.
Plug n Play.
Unlike competing RGB "systems" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside a unique two-piece aluminum housing--the larger of which gets the circuit board that's then hard epoxy coated. These things are bulletproof! Make sure your setup looks good inside and out!
This kit includes
You will need to modify your stock headlight housings in order to install this retrofit kit. These components are spec'd for this vehicle as the most appropriate options, but are not a direct fit. Common sense & cutting will be required!
Brake Lights So bright they can't be missed. The Morimoto 5Stop LED brake lights uses five strong 5W Red LED's to illuminate the rear-end of your bike and indicate to...
Hella OEM. Couple this abrasion-resistant TechFlex mesh sleeving with our cloth harness tape for the best wiring job possible. Hella Clean. Convoluted plastic tubing has no place in a quality...
No substitutes If you're still running oldschool halogen headlights on your F150, then you're just behind the times! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually...