2015-2020 Subaru WRX/STi C-Light Switchback LED Halos



Compatible with 2018+ WRX Base and Premium, but not compatible with 2018+ WRX Limited or STi.

Time for an upgrade!

These C-Light LED modules are circuit boards that fit right behind the factory diffusing reflector, illuminating in an extremely bright white, as well as a brilliant amber. Don't be fooled by other options on the market: these LEDs have been designed from the ground-up for this application to be absolutely the brightest lights physically possible.

High output, clean appearance.

The custom-designed LED modules replace the factory bulb or single LED, illuminating with a much higher intensity. With our proprietary high-density "HDLED" technology, these modules are populated with over 500 LED chips, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When it's off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.

Pure white color.

The modules light in a pure 6000K white color, not a cool blue like cheaper products on the market. And because they use modern high-power amber chips, rather than traditional LEDs, the amber is even brighter than the white!

Constant-current power.

To power the modules efficiently, your order includes two custom-designed drivers, which feature transient voltage suppression, reverse protection, and a switching driver for extremely high reliability over time. And here's what really makes this product shine over the competition: with an embedded microcontroller, the drivers utilize multi-stage PWM dimming, to allow for a half-brightness white, for use at night (parking lights), as well as a full-power white, for use as DRL during the day. Finally, the amber is run at even higher power, making the turn signal easily visible in broad daylight!

Wire it up.

Wiring instructions are included with your order. You will need to use the included T-tap connectors to connect the drivers to ground, parking signal, and turn signal on each side. Another wire is included for DRL connection. You can tap this into your DRLs to have the C-Light come on as a DRL alongside your factory DRL bulb. If you wish, you can add the DRL Harness to your order. Fully plug-and-play, this harness will disable your factory DRL, and power the C-Lights instead. Your high beam will still work as normal.

 

 This kit includes

Features

Tech specs

  • Two (2) custom-shaped LED halos, left and right
  • Two (2) waterproof driver units
  • Two (2) input wire pigtails
  • Eight (8) T-tap input connectors
  • Installation Guide
  • Computer-designed LED halos, for perfect fitment in WRX/STi headlamps
  • Huge increase in brightness, with pure white and brilliant amber output
  • Over 5000 sets installed, with proven reliability
  • Optional DRL harness allows the LEDs to function just like factory DRL
  • Total LEDs: 524 (262 per side)
  • Real LED Output Power: 13 watts Amber, 10 watts DRL, 5 watts parking (per side)
  • Inputs: Plug-and-play connector for ground and parking light. T-taps for DRL and turn signal.
  • Integrated Protection: Full waterproofing and shockproofing, transient suppression, overvoltage protection, thermal shutdown, reverse input protection.
  • Measured Lumens: 1100
  • Color Temp (CCT): 6000K
  • Beam Angle: Omnidirectional (270 degrees)
  • Power (watts): 22
  • Operating Voltage: 5-16V
  • Current (amps @ 13.2V): 1.7
  • Polarity: Polarity Specific
  • Operating Temperature: -40C to 85C (-40F to 185F)
  • LED Emitter: Custom-Manufactured
  • Connector(s): JST Inline Connectors, T-Tap Inputs
  • Driver Features: External, Waterproof, Constant Current
  • Materials: FR4 PCB
  • Cooling: Passive, no heatsink


        Related Items